Electrochemical Study of the Lipid‐Transfer Protein

Electrochemical study of barley grain lipid‐transfer protein (LTP) revealed that it may belong to the metal‐binding protein class. Using differential pulse polarography the presence of Cu(II) and Zn(II) ions in the native LTP structure was proved, as well as its affinity for binding Ni(II) ion. Application of a more sensitive electroanalytical technique, such as anodic stripping voltammetry with analyte preconcentration, revealed the presence of Pb(II) and Cd(II) ions and also enabled the following Hg(II) ion binding. Possible biological role of LTP in plant stress response and its contribution to barley phytoextraction potential are discussed.     

FFC-1离子交换纤维物理化学性能的研究

利用扫描电镜、热失重-红外、元素分析、低温氮吸附等技术和化学手段对聚羧酸基FFC-1离子交换纤维的结构与性能特点等进行了系统研究．结果表明：FFC-1离子交换纤维为含适量酰肼类交联键的聚羧酸(钠)型离子交换材料，外比表面积大和传质距离短是其反应动力学性能优异的主要原因，FFC-1纤维具有良好的化学与热稳定性。在5mol/L硫酸、硝酸、盐酸和2mol／L氢氧化钠溶液中浸泡，交换容量未见明显降低。但过氧化氢溶液对其功能基有明显破坏，CO2为FFC-1纤维在高温区间(300℃～350℃)的主要分解产物。     

In silico engineering of tailored ink-binding ability at molecular printboards.

Molecular recognition between guest ink molecules and beta-cyclodextrin (beta-CD) cavities at self-assembled monolayers provides a molecular printboard for nanopatterning applications. We recently used molecular dynamics (MD) simulations to describe the specificity of ink-printboard binding and here extend the simulations to include charged cyclodextrin hosts, necessary to broaden the chemistry of molecular printboards and bind charged inks such as the ferrocenium cation. Shifting to high pH, or alternatively grafting a charged sidearm onto beta-CD, created three distinct types of anionic beta-CD cavity and we used electronic structure calculations and MD simulations to measure host-guest charge transfer and binding strengths. We find that steric recognition of uncharged organic molecules is retained at the charged printboards, and that improved guest-host electrostatic contacts can strengthen binding of larger inks while penalising small inks, enhancing the level of discrimination. A prudent choice of complementary host-guest shape and charge states thus provides a means of tuning both ink binding strength and specificity at molecular printboards.     

不同粒径炭黑混合对复合型导电材料PTC性能的影响

研究了炭黑分散效果对具有PTC效应的高密度聚乙烯／炭黑导电复合材料性能的影响。实验结果表明，由不同粒度和比表面积的两种炭黑混合后填充的复合材料同由导电性能较好的乙炔炭黑填充复合材料比较，前者具有较低的渗滤阀值、较高的临界温度、优良的PTC特性以及电阻稳定性好的特点．     

Addressing the metabolic activation potential of new leads in drug discovery: a case study using ion trap mass spectrometry and tritium labeling techniques

Metabolic activation of drug candidates to electrophilic reactive metabolites that can covalently modify cellular macromolecules may result in acute and/or idiosyncratic immune system-mediated toxicities in humans. This presents a significant potential liability for the future development of these compounds as safe therapeutic agents. We present here an example of an approach where sites of metabolic activation within a new drug candidate series were rapidly identified using online liquid chromatography/multi-stage mass spectrometry on an ion trap mass spectrometer. This was accomplished by trapping the reactive intermediates formed upon incubation of compounds with rat and human liver microsomes as their corresponding glutathione conjugates and mass spectral characterization of these thiol adducts. Based on the structures of the GSH adducts identified, potential sites and mechanisms of bioactivation within the chemical structure were proposed. These metabolism studies were interfaced with iterative structural modifications of the chemical series in order to block these bioactivation sites within the molecule. This strategy led to a significant reduction in the propensity of the compounds to undergo metabolic activation as evidenced by reductions in the irreversible binding of radioactivity to liver microsomal material upon incubation of tritium-labeled compounds with this in vitro system. With the efficiency and throughput achievable with such an approach, it appears feasible to identify and address the metabolic activation potential of new drug leads during routine metabolite identification studies in an early drug discovery setting.     

Ga^3＋的新萃取体系的界面特性和胶团化作用研究

研究了Ｇａ~（３＋）协萃体系（Ｇａ~（３＋）－Ｄ_２ＥＨＰＡ－Ｈ_２ＭＰＡ－正十二烷－Ｈ_２ＳＯ_４）的界面吸附和胶团形成热力学，发现该萃取体系中［Ｈ_２ＭＰＡ］影响Ｄ_２ＥＨＰＡ和Ｈ_２ＭＰＡ的界面吸附性质。在中、高［Ｈ_２ＭＰＡ］范围内Ｄ_２ＥＨＰＡ与Ｈ_２ＭＰＡ的界面吸附行为相反，Ｄ_２ＥＨＰＡ的存在也影响Ｈ_２ＭＰＡ的界面吸附行为。研究了界面张力与各因素关系的数学模型，并获得某些胶团形成和界面吸附特性的物化参数。     

PREPARATION AND ELECTROCHEMICAL CHARACTERISTICS OF POLYMER ELECTROLYTE MEMBRANES BASED ON SAN/PVDF-HFP BLENDS

A copolymer of poly(acrylonitrile-co-styrene) (SAN) was synthesized via an emulsion polymerization method. Novel polymer electrolyte membranes cast from the blends of poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP), SAN and fumed silica (SiO2) are microporous and can be used in polymer lithium-ion batteries. The membrane shows excellent characteristics such as high ionic conductivity and good mechanical strength when the mass ratio between SAN and PVDF-HFP and SiO2 is 3.5/31.5/5. The ionic conductivity of the membrane soaked in a liquid electrolyte of 1 mol/L LiPF6/EC/DMC/DEC is 4.9×10-3 S cm-1 at 25℃. The membrane is electrochemical stable up to 5.5 V versus Li /Li in the liquid electrolyte. The influences of SiO2 content on the porosity and mechanical strength of the membranes were studied. Polymer lithium-ion batteries based on the membranes were assembled and their performances were also studied.     

Sorption of aliphatic ketones from aqueous solutions by starch cryotextures

Capillary gas chromatography was applied to study the sorption of aliphatic ketones (C₆—C₁₁), including metamers, from aqueous solutions by corn starch cryotextures. The amount of ketones sorbed by cryotextures depends linearly on their concentrations in the initial sol. Equations describing the concentration dependence of sorption were proposed. The shape of sorption isotherms reflects the strength of sorption. The binding constants and the number of binding sites were determined for weakly sorbed ketones. The length of alkyl substituent and the position of the functional group are the crucial factors governing the sorption of ketones under conditions of excess binding sites. It was found that the degree of sorption increases with an increase in the carbon chain length from 6 to 9 carbon atoms. The presence of cooperation of binding sites for ketone sorption by cryotextures was demonstrated. The major part of ketones is sorbed irreversibly. This fact points to the formation of supramolecular complexes. Ketones with lower molecular masses are better sorbed by cryotextures than by native starch grains.     

葫芦脲：分子识别与组装

综述了葫芦脲这一类合成受体的最新研究进展，包括葫芦脲的分子设计与合成 ，离子和分子识别，键合的热力学性质，分子组装及其功能的最新研究概况。     

Solubility Study of Nimodipine Inclusion Complexation with α- and β-Cyclodextrin and some Substituted Cyclodextrins

The solubility of nimodipine was measured in aqueous solutions of the following cyclodextrins: -cyclodextrin (-CD), hydroxypropyl--CD (HP--CD), -cyclodextrin (-CD), random substituted methyl--CD (M--CD), three hydroxypropyl--CDs (HP--CD) with mutually different average degree of substitution, and hydroxypropyl--cyclodextrin (HP--CD). From the determined linear solubility diagrams the values of the binding constant K₁₁ of the inclusion complexes of nimodipine with the respective CDs were evaluated. The -CDs efficiently solubilized sparingly soluble nimodipine, the highest value of K₁₁ was found for M--CD (1680 M^-1), followed by -CD (550 M^-1) and HP--CDs, where the higher degree of substitution lowered K₁₁. Only slight solubilization of nimodipine was observed in the solutions of the -CDs and HP--CD.